


This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
The AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b-EL) and cardioid (AT4051b-EL).
Features:
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
- RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
| Microphone Type | Condenser |
|---|---|
| Polar Pattern | Hypercardioid |
| Frequency Response | 20Hz-20kHz |
| Max SPL | 145dB SPL, 1 kHz at 1% T.H.D., 155dB SPL, with 10 dB pad (nominal) |
| Output Impedance | 50 ohms |
| Signal to Noise Ratio | 78dB, 1 kHz at 1 Pa |
| Self Noise | 16dB (A weighted) |
| Sensitivity | -34dB (19.9 mV) re 1V at 1 Pa |
| Low Cut Filter | 80Hz |
| Pads | -10dB |
| Connector | XLR |
| Features | Flat, roll-off; 10dB pad (nominal) |
| Color | Black |
| Power Source | 48V phantom power |
| Dimensions | 6.10 x 0.83" |
| Weight | 0.28 lbs. |
| Included Accessories | 5/8"-27 mic clip, windscreen, protective carrying case |
You must be logged in to post a review.














Reviews
There are no reviews yet.