Blackstar 100 Series One MK2 100-watt Tube Amplifier Head – Black

$2,630.00

100W, 4-channel Guitar Tube Amp Head with 6 Voices, DPR, Speaker-emulated Out, Effects Loop, MIDI, and ISF

1 in stock

Total Sold: 0 Available Item: 1
Purchase & earn 5,260 points!
Add to CompareAdded
SKU: S1-100-MKII Categories: , Tags: , ,

A Comprehensive Upgrade to the Blackstar That Started It All

Building upon Blackstar’s time-tested Series One formula, the 100 Series One MK2 represents the ultimate iteration of the model Blackstar first launched way back in 2007. This 100-watt tube head is a true ground-up redesign of the original Series One, sporting four footswitchable channels and six tonal voices to swap between. Twin tone-shaping sections allow you to tweak and trim every element of your tone, consisting of two 3-band EQs and dual ISF controls. Plus, you also get a Master section with Resonance, Presence, and Volume controls to further aid you in your sonic endeavors. Topped off with a Dynamic Power Reduction (DPR) knob that transforms your output from 100 to 10 watts, the 100 Series One MK2 dishes out tight, crushing rhythm tones and sizzling lead saturation at any volume level. And to accommodate the ever-expanding needs of modern performing and recording guitarists, Blackstar outfitted this amp with flexible MIDI functionality, emulated outputs, and a handy effects loop. Complete with over 30 circuit modifications and voicing tweaks, an upgraded 1.6-millimeter steel chassis, higher-quality components, and all sorts of internal enhancements, the Blackstar 100 Series One MK2 takes Blackstar’s flagship series to new high-gain heights.

Four metal-ready channels with six total voices

Blackstar’s 100 Series One MK2 comes equipped with four footswitchable channels: Clean, Crunch, OD 1, and OD 2. Aimed to satisfy the needs of modern metal guitarists everywhere, these channels run the gamut from crushing gain-drenched chug to liquid leads to cleaner and more subtle characters. Moreover, the Clean channel sports a switch to turn your tone from Warm to Bright, while the Crunch channel’s Super Crunch switch injects your signal with searing high-octane heat. Finished off with two 3-band EQs and ISF controls (one for Clean and Crunch and one for OD 1 and OD 2), the Blackstar 100 Series One MK2 is an immensely versatile tube amplifier head that rewards adventurous tone chasers with a massive range of sounds to explore.

Crushing tube tones at any volume

Clocking in at 100 watts, the 100 Series One MK2 running full bore roars with stage-shaking power. It’s a sound to behold, yet City Music’s guitarists are equally impressed with this amp’s living-room-appropriate volume thanks to Blackstar’s powerful DPR knob. It allows you to take this amp’s output down from 100 watts to 10 watts, all without compromising an inch on sound, feel, and sag. From jamming out riffs in the bedroom to recording in your basement studio, the Blackstar 100 Series One MK2 gives you the rich saturation and complex harmonics of glowing glass at any volume.

Seamlessly integrates into any stage or studio rig

Need to lay down a few tracks without making a sound? The Blackstar 100 Series One MK2’s rear panel features a speaker-emulated output with 1/4-inch and XLR outs. This handy feature makes late-night and apartment recording a breeze, allowing you to achieve authentic-sounding tones without rattling the windows. What’s more, the 100 Series One MK2’s effects loop cleanly integrates your entire stompbox collection, and you even get a +4dBu/-10dBV pad switch built into the loop. Finished off with variable impedance to connect to any cab and 5-pin MIDI Thru/In jacks to hook into your cutting-edge MIDI-fueled stage rig, the Blackstar 100 Series One MK2 brandishes all the bells and whistles that modern performing and recording guitarists require.

Blackstar 100 Series One MK2 Features:

  • Upgrades Blackstar’s long-standing flagship series of tube amps with over 30 circuit mods and wiring tweaks, upgraded components, and a vastly expanded tonal palette
  • Dishes out 100 watts of tube firepower, consisting of 4 ECC83 preamp tubes, 4 6L6 power tubes, and 1 ECC82 tube
  • Boasts 4 footswitchable channels with 6 voicings: Clean (Warm/Bright), Crunch (normal/Super Crunch), OD 1, and OD 2
  • 2 EQ sections, consisting of 3-band EQs and Blackstar’s patented ISF control to take your tonal profile from American to British
  • Master control section includes Resonance, Presence, and Volume knobs
  • DPR knob transforms this head’s 100-watt roar down to a living-room-friendly 10 watts
  • Speaker-emulated outputs for whisper-quiet recording
  • Effects loop with built-in pad to accommodate your stompbox collection
  • MIDI-capable design, with 5-pin MIDI Thru/In jacks for complex stage switching rigs
  • Variable speaker impedance allows you to connect to almost any cab
  • Premium 1.6mm steel chassis, metal grille plates, finger-jointed birch ply cabinet, and plated-through double-sided PCBs are built to last the long haul
Type

Tube

Number of Channels

4

Total Power

100W RMS (10W setting)

Preamp Tubes

4 x 12AX7, 1 x 12AU7

Power Tubes

4 x 6L6

EQ

2 x 3-band EQ, 2 x ISF control, Resonance, Presence

Inputs

1 x 1/4" (instrument)

Outputs

2 x 1/4" (4 ohms, 8 ohms, 16 ohms), 1 x 1/4" (emulated out), 1 x XLR (emulated out)

Effects Loop

Yes

MIDI I/O

2 x 5-pin DIN (In, Thru)

Footswitch I/O

1 x 9-pin DB45 (channel)

Construction Material

Black Tolex, 1.6mm Seam Welded Steel Chassis

Power Source

Standard IEC AC cable

Reviews

There are no reviews yet.

Be the first to review “Blackstar 100 Series One MK2 100-watt Tube Amplifier Head – Black”