You have no items in your shopping cart.
Subtotal: S$0.00
Excellence in Natur-real Amplification.
Udo Roesner, who has been designing acoustic instruments for over 30 years and is also known as the founder of AER Amps, has launched a new brand. The first model to introduce Udo Roesner Amps is Da Capo 75. A combo amplifier that boasts the best performance and specifications in a compact housing.
Udo Roesner Amps products are designed and developed by Udo Roesner himself at MARco-labs in Germany and France. By producing in Indonesia, which has a reputation for musical instrument production, we have achieved reasonable prices while maintaining quality.
A 2-channel acoustic instrument combo amplifier equipped with custom-made 8-inch twin cone type speakers. It boasts a 75W output power in a compact housing and has six types of effects. Optimal size, power and performance. The ideal amplifier for acoustic instruments.
A newly redesigned sound that incorporates the know-how cultivated over many years of amplifier production
The Da Capo 75 features a more optimized bass and mellow but clear midrange compared to conventional amplifiers
2 channel specifications
Each channel supports mic / line (with combo jack), 3-band EQ, and 6 effects.
Abundant input / output terminals
Equipped with two channel independent DI outs, two line outs with different output levels, AUX input, phantom power, high pass filter, headphone out, etc.
Compact and robust housing
Achieving sufficient output and durability in a compact case that is easy to carry. It is also easier to carry in the included bag.
Specifications
Input
- input 1 / input 2 common: XLR & 1/4 inch TRS phone combo jack
- line mode: High impedance jack for musical instruments (directly connected from pickup), unbalanced, line level
impedance: 2.2MΩ
Sensitivity: 22mV (-33dBV) * Attenuation can be set by internal jumper
Equivalent noise level: 1uV (-120dBV) A -Weighted
- mic mode: XLR balanced / phone jack unbalanced
impedance (XLR balance): 1.2kΩ
impedance (phone jack unbalanced): 2.7kΩ
sensitivity: 3.3mV (-50dBV)
voice filter: -10dB @ 270Hz
equivalent noise level: 0.8uV ( -122dBV) A-Weighted
phantom power (XLR only): 48V max 10mA (with short protection circuit)
- return: 1/4 inch phone jack, unbalanced, premaster
Output
- phones: 1/4 inch TRS stereo phone jack
Impedance: 470Ω
* Mono jack cannot be used
* Output from speakers is muted when headphones are connected
- send: 1/4 inch phone jack, unbalanced, premaster
Output voltage: 1.4V (+ 3dBV)
- line out 1 / line out 2: 1/4 inch phone jack, unbalanced, preamp out
Output voltage 2: 1.74V (+ 3dBV)
Output voltage 1: 0.33V (-4.6dBV)
- DI-out 1 / DI-line out 2: 1 XLR balance, pre-master, post-EQ / effect
Output voltage: 140mV (-17dBV)
(1 = ground / 2 = hot / 3 = cold)
Foot switch
- footswitch: 1/4 inch TRS stereo phone jack
- Latch type dual foot switch connected
(Tip = on / off of built-in effect / Ring = parameter setting tap n 'delay / sleeve = ground)
EQ
- channel 1
bass: 8dB @ 100Hz (shelf type)
middle: 6dB @ 800Hz
treble: 8dB @ 10kHz (shelf type)
- channel 2
hpf filter: 40Hz-350Hz
middle: 6dB @ 800Hz
treble: 8dB @ 10kHz (shelf type)
Effect
- effect presets:
1-reverb short
2-reverb long
3-chorus
4-custom delay
5-my delay
6-tap n 'delay
- external effect: parallel effect loop
- efx pan: effect amount setting for internal effects / internal effects)
| Power amplifier output | 75W / 4Ω |
| Speaker system | 8 inch (200mm), twin cone full range |
| Cabinet | 12mm plywood |
| Body Finish | Sputter finish with black polyester |
| Power consumption | Up to 200W |
| Power supply | 230VAC (50 / 60Hz) |
| Dimensions | 265mm (H) × 325mm (W) × 245mm (D) |
| Body weight | 7.5kg |
| Accessories | 24.9" |
- * Specifications and appearance are subject to change without notice for improvement.
- * All product names and company names are the trademarks or registered trademarks of their respective owners.
